temp1_r1_c1
 

One of difference between ECS system and other pyrolysis is the product quality.
Carbon black is the most corcern of the quality. The traditional pyrolytic system will produce bad quality of carbon black. It content much of ash, sulfur, and not completely cracking material. It couse the second pollution. The second problem is oil quality. too low flash point and much sulur content are key problem to meet the requirement of the market.

ECS is design to solve these problem. 

Items

Diesel Oil

ECS - Oil Products

Flash Point

> 60C

adjustable

ASTM D92

Floating Point:

 

-9C

ASTM D97

Kinematic Viscosity at 40C

1.9- 4.3

4.22

ASTM D445

Density / 25C

 

0.887

ASTM 4052

Sulfur wt%

< 1%

< 0.75

ASTM D4294

Water & Ash

< 0.1%

< 0.1%

ASTM D95

Remark: Oil product from the waste tires pyrolysis process

 1. Analysis result from SGS

 2. Oil not go through the sulfur removing process

 3. Oil not go through the filtering process

 4. Flash point can be adjusted

Items

Rubber Carbon
in Market

ECS - Carbon Black

Surfacem2/g

10 - 40

> 85

ASTM D3663

Iodine Valuemg/g

10 - 40

> 120

ASTM 3495

Oil Content%

> 5%

< 0.01%

ASTM D3495

Ash Content %

>12%

<5%

 

Sulfurwt%

>2.5%

< 1.5

ASTM D4294

Remark: Carbon product from the waste tires pyrolysis process

1. Surface and iodine value can be increased time by time

2. The time of process is about 22min for one ton of tires chip

3. Sulfur content depend on the type of tire
app-5

Carbon Black applied in waste water treatment